 | |
 | MBD-X10SLQ -B | |
| |
 | Form Factor | | Dimensions | - 9.6" x 9.6", (24.4cm x 24.4 cm)
|
| |
 | CPU | - Intel® 4th Gen Core i7/i5/i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| |
 | Memory Capacity | - 4x 240-pin DDR3 DIMM sockets
- Supports up to 32 GB DDR3 non-ECC Un-Buffered memory (UDIMM)
| Memory Type | - 1600MHz non-ECC DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
| DIMM Sizes | | Memory Voltage | |
| |
 | Chipset | - Intel® Q87 Express Chipset
| SATA | - SATA3 (6Gbps) w/ RAID 0, 1, 5, 10 via PCH with Intel RST
| Network Controllers | - Intel® i217LM + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| Audio | - RealTek ALC888S 7.1 High Definition Audio
| VGA | | Super I/O | |
| |
 | Serial ATA | - 6x SATA 3.0 ports (6Gbps) including 1x mSATA
| LAN | - 2x RJ45 Gigabit Ethernet LAN ports
| USB | - 4x USB 3.0 ports (2 rear, 2 via header)
- 8x USB 2.0 ports (4 rear, 4 via headers)
| Audio | - 7.1 HD Audio header and rear I/O
| Display | - 1x VGA, 1x HDMI, 1x DVI-D, 1x Display port from Intel HD 4600 Graphics, 3x Independent Displays
| Serial Port / Header | - 4x COM ports (headers); COM2 with RS422/485 support
| DOM | - SATA DOM (Disk on Module) power connector support
| Security | | Others | - PS/2 connector for mouse and keyboard
|
|  |  | |
 | Mid/Mini Tower Chassis: | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
| |
| |
 | PCI-Express | - 1x PCI-E 3.0 x16 (in x16) slot
- 1x PCI-E 2.0 x4 slot
- 1x PCI-E 2.0 x1 slot
- 1x Mini-PCI-E w/ mSATA support
|
| |
 | BIOS Type | - 128Mb SPI Flash EEPROM with AMI BIOS
| BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| |
 | Software | | Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Internal/External modem ring-on
|
| |
 | Voltage | - Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| FAN | - Total of four 4-pin fan headers supporting up to 4 fans
- 4x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Adaptive Thermal Monitor, PECI 3.0
| LED | - CPU / System Overheat LED
- +5V Standby alert LED
| Other Features | - Chassis intrusion detection
- Chassis intrusion header
|
| |
 | • 0°C to 60°C |
|