HRT-710

Introduction: The HRT-710 is a HART to Modbus RTU/ASCII gateway designed to allow Modbus master devices to access HART slave devices such as transmitters, actuators, and other field instruments. It supports both short and long frame formats, burst mode, and dual HART masters. With the included HG_Tool utility, users can easily configure the module and diagnose HART devices, making integration into Modbus networks seamless and efficient.

HART to Modbus RTU/ASCII Gateway – ICP DAS

Key Features

• Protocol Conversion: Converts HART to Modbus RTU/ASCII
• HART Support: Short/long frame, burst mode, point-to-point and multi-drop modes
• Dual HART Masters: Supports two masters per channel
• Device Capacity: Connects up to 15 HART devices
• Loop Resistor: Built-in 250 O (1/4W) selectable via jumper
• Utility Software: HG_Tool for configuration and diagnostics
• LED Indicators: Status LEDs for power and communication
• Mounting: DIN-Rail or wall mountable

Specifications

• COM Ports: RS-232 (3-wire), RS-422, RS-485
• Baud Rates: 1200 to 115200 bps
• HART Port: 1 channel, 2-wire or 4-wire HART devices
• Power Input: +10 ~ +30 VDC (unregulated)
• Power Consumption: 1 W
• Isolation: UL1577 spec
• Dimensions: 72 x 35 x 121 mm (W x L x H)
• Operating Temperature: -25°C to +75°C
• Humidity: 10% to 90% RH, non-condensing