|
 | | MBD-X10SLV-Q -B | |
| | |
| | Form Factor | | | Dimensions | - 6.7" x 6.7", (17cm x 17cm)
|
| | |
| | CPU | - Intel® Xeon® processor E3-1200 v3 and 4th Gen Core i7/i5/i3, Pentium, Celeron processors
- Single Socket H3 (LGA 1150)
|
| | |
| | Memory Capacity | - 2x 204-pin DDR3 SODIMM sockets
- Supports up to 16 GB DDR3 non-ECC SODIMM
| | Memory Type | - 1600MHz non-ECC DDR3 SDRAM 64-bit, 204-pin gold-plated SODIMMs
| | DIMM Sizes | | | Memory Voltage | |
| | |
| | Chipset | - Intel® Q87 Express Chipset
| | SATA | - Intel® Q87 Express Chipset
| | USB | - Intel® Q87 Express Chipset
| | Network Controllers | - Intel® i217 + Intel® i210AT Controllers
- Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
| | Audio | - RealTek ALC888S High Definition Audio
| | Graphics | - Intel HD 4600 Graphics, Processor Graphic
| | Super I/O | |
| | |
| | Serial ATA | - 4x SATA 3.0 ports (6Gbps) including 1x mSATA
- Raid 0.1.5.10
| | LAN | - 2x RJ45 Gigabit Ethernet LAN ports
| | USB | - 2x USB 3.0 ports (rear)
- 5x USB 2.0 ports (2 rear, 2 via headers, 1 type A)
| | Audio | - HD Audio Front Panel Headers
| | Display | - 1x DisplayPort, 1x HDMI, 1x DVI-I, 3 Independent Displays
| | Serial Port / Header | - 5x COM ports (1x RS232/422/485, 4x RS232)
| | DOM | - SATA DOM (Disk on Module) power connector support
| | Security | |
|  | | |
| | 1U Chassis: | | | Mid/Mini Tower Chassis: | | | Mini-ITX Chassis: | | | Important Chassis Notes | - To support the new generation Intel® Xeon® processor-based motherboards,Revision M chassis is recommended. Please talk to your sales representative for details.
| |
| |
| | Model(s) | |
| | |
| | PCI-Express | - 1x PCI-E 3.0 x16 slot
- 1x Mini-PCIe w/ mSATA support
|
| | |
| | BIOS Type | - 128Mb SPI Flash EEPROM with UEFI BIOS
| | BIOS Features | - DMI (SMBIOS) 2.7
- ACPI 5.0
- USB Keyboard support
|
| | |
| | Software | | | Power Configurations | - ACPI / ACPM Power Management
- Main Switch Override Mechanism
- Power-on mode for AC power recovery
- Modem ring-on
|
| | |
| | Voltage | - Monitors for CPU Cores, +1.8V, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages.
- 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
| | FAN | - Total of three 4-pin fan headers supporting up to 3 fans
- 3x fans with tachometer status monitoring
- Status monitor for speed control
- Status monitor for on/off control
- Support 3-pin fans (w/o speed control)
- Low noise fan speed control
- Pulse Width Modulated (PWM) fan connectors
| | Temperature | - Monitoring for CPU and chassis environment
- CPU thermal trip support
- Adaptive Thermal Monitor, PECI 3.0
| | LED | - CPU / System Overheat LED
- +5V Standby alert LED
| | Other Features | - Chassis intrusion detection
- Chassis intrusion header
- 4-pin 12V DC input
|
| | |
|
• 0°C to 60°C |
|